Safety
quantum
M A S C H I N E N - G E R M A N Y
©
2
007
GB
Page 8
Drilling machine
B 13 / B14 / B16 / B20 / B25 / B32
Version 1.2.5
18 / 01 / 2008
1.4
Qualification of employees
1.4.1
Target group
This manual applies to
•
the operators,
•
the users,
•
the maintenance staff.
Therefore, the warning notes refer to both operation and maintenance of the drilling machine.
Determine clearly and make a permanent decision in who will be responsible for the different
activities on the machine (operation, maintenance and repair).
Vague and unclear assignment of responsibilities constitute a safety hazard!
Always disconnect the main plug of the drilling machine. This will prevent it from being used by
unauthorized persons.
1.4.2
Authorized persons
WARNING!
Incorrect use and maintenance of the drilling machine constitute a danger for the staff,
objects and the environment.
Only authorized persons may operate the drilling machine!
Persons authorized to operate and maintain should be trained technical staff and
instructed by the ones who are working for the operator and for the manufacturer.
The operator must
Obligations
of the opera-
tor
•
train the staff,
•
instruct the staff in regular intervals (at least once a year) on
-
all safety standards that apply to the drilling machine,
-
the operation,
-
accredited technical guidelines,
•
check the knowledge of the staff,
•
document training / instructions,
•
require the staff to confirm participation in training / instructions by means of a signature,
•
check if the staff is aware of safety rules and dangers in the workplace so that they observe
the operating manual.
The user must
Obligations
of the user
•
have followed a training on the operation of the drilling machine,
•
know the function and performance,
•
before commissioning
-
have read and understood the operating manual,
-
be familiar with all safety devices and regulations.
Further
require-
ments to the
qualification
For working on the following machine parts, additional requirements are being applied:
•
Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, following measures are to be per-
formed in the following order.
