16000, 26000, and 28000 Security Appliances Installing the Telescopic Rails
16000, 26000, and 28000 Appliances Telescopic Rails | 5
16000, 26000, and 28000 Security
Appliances Installing the Telescopic
Rails
You can install these security appliances in a rack with the telescopic rails hardware:
Security Appliance
In This Document
16600 Hyperscale Security Appliances (1U)
16600HS
28600 Hyperscale Security Appliances (1U)
28600HS
16000 Base/Plus/Turbo Security Appliances (2U)
16000
16200 Base/Plus Security Appliances (2U)
16200
26000 Base/Plus/Turbo Security Appliances (3U)
26000
28000 Base/Plus Security Appliances (3U)
28000
General Requirements for Racks
Check Point appliances are designed for a standard 19-inch (48.26 cm) rack (see specification EIA-310-D).
The telescopic rails are designed for racks with these specifications:
Minimum Depth
Maximum Depth
SKU
22 inches (55.9 cm)
32 inches (81.3 cm)
CPAC-RAIL-L
24 inches (61 cm)
36 inches (91.4 cm)
CPAC-RAIL-EXT-L
Front and rear rack doors must have equally distributed holes on at least 65% of the surface area to give
sufficient airflow. Make sure that the racks have sufficient clearance to service the Check Point appliances
that are mounted on telescopic rails.
The telescopic rails can be used with racks that have round holes or square holes.
Rack
Side
Clearance Requirement
Front
36 in (91.4 cm) plus additional clearance, if necessary, for the mechanical lift used to move
the appliance and rails equipment.
Rear
16 in (40.6 cm) from the rear of the rack or appliance without the rear cabinet door.
22 in (55.9 cm) from the rear of the rack or appliance with the rear cabinet door.
