Managing Network Object Groups
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 275
Managing Network Object Groups
The
Users & Objects
>
Network Object Groups
page lists the network object groups defined in the system.
In this page you can add new network object groups, edit network object groups, and delete network object
groups.
We recommend you define groups for network objects to configure the security policy. If you configure
security policy with groups and not specified objects, it is much easier to maintain the policy over time. When
new network objects are added to the system, you only need to add them to the relevant groups and your
policy automatically applies.
To create a new network object group:
1. Click
New
.
The New Network Object Group window opens.
2. Enter a
Name
for the group and
Comments
(optional).
3. Click
Select
to show the full list of available network objects and choose the relevant checkboxes.
4. Click
New
if the existing list does not contain the network object you need. For information on creating
a new network object, see the
Users & Objects
>
Network Objects
page.
5. Click
Apply
.
The New Network Object Group window opens and shows the services you selected
6. You can also click
New
from the New Network Object Group window.
7. To remove a network object from the group list, select it and click
Remove
.
8. Click
Apply
.
The network object group is added to the list of groups.
To edit a network object group:
1. Select a group from the list.
2. Click
Edit
.
3. Make the necessary changes.
4. Click
Apply
.
To delete a network object group:
1. Select the group from the list.
2. Click
Delete
.
3. Click
Yes
in the confirmation message.
To filter for a specified service group:
1. In the
Type to filter
box, enter the network object group name or part of it.
2. As you enter text, the list is filtered and shows matching results.
