Installing Components in the DXi4700 Node
Quantum DXi4700 Installation Guide
20
To install the additional hard drives in the DXi4700 Node:
Caution:
Use appropriate ESD precautions, including the use of a grounding strap, when performing
this procedure.
1. Remove the hard drive blank from each hard drive slot (slots 6–11):
a. Grasp the front of the hard drive blank and press the release button (see
).
b. Slide the hard blank out until it is free of the hard drive slot.
Figure 8:
Removing a Node Hard Drive Blank
1
2
Item
Description
1
Hard drive blank
2
Release button
2. Install a hard drive in each hard drive slot (slots 6–11):
Note:
The additional hard drives are not keyed to a particular slot. You may install any hard drive in
any slot, as long as it is installed in slot 6–11.
Caution:
Use only the Quantum-supplied hard drives in the DXi4700 Node. Do not use any other
drive (not even one taken from another DXi).
