Initial Configuration
Quantum DXi4700 Installation Guide
56
Figure 43:
Internet Protocol Version 4 (TCP/IPv4) Properties Window
d. Select
Use the following IP address
and then enter the following information:
Caution:
Before changing the IP address information, write down the original settings. This
will be used later to reset the network configuration.
l
IP address
- 10.1.1.2
l
Subnet mask
- 255.255.0.0
e. Click
OK
, and then click
Close
.
f. Wait at least two minutes for the computer to set the IP addresses on the local computer.
4. On the computer, open a supported Web browser, type
10.1.1.1
in the
Address
box, and press
