Quantum DXi690 Series, Quick Start Manual

Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement

6-68446-01

April 2016

Replacing the DXi6802 Array or Expansion Module Rails

11

Installing the DXi6802 

Array or Expansion 

Module

To install the DXi6802 Array Module or Expansion Module:

1

Align the Array or Expansion Module with the rails and slide the module into 

the rack (see 

Figure 10

).

Figure 10  Installing the Array 
or Expansion Module

2

Insert one M5 screw through the bottom hole in the front of each rail to 

secure the module in place (see 

Figure 9

).

3

Install the end caps on either side of the module by inserting the top of the 

end cap first and then snapping the bottom into place.
Install the end cap with the indicator icons to the left of the module, and 

install the end cap with the drive numbers to the right of the module.

4

Reconnect all power and SAS cables on the rear of the module.

Note:

For cabling diagrams, see the 

DXi6800 Installation and 

Configuration Guide

 (6-67757) at

 www.quantum.com/DXi6800docs

.

5

Turn on the system (

Turning On the System

 on page 17).

End caps (indicator icons)

Expansion Module

End cap (drive numbers)

Array Module