Quantum DXi690 Series, Quick Start Manual

Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement
6-68446-01
April 2016

2

Shutting Down the System

Shutting Down the System

To shut down the system:

Caution:

Before shutting down the DXi6802 or DXi690x, make sure that all 

backup and replication jobs are finished, and that space 

reclamation activity is complete.

1

Shut down the system from the remote management console using the 

Shutdown

 option on the 

Utilities > Reboot & Shutdown

 page.

Note:

Shutting down the system can take up to 15 minutes. Only the 

Node will completely shut down.

Note:

If you need help accessing remote management, see the 

DXi6000 

User’s Guide

 (6-67199) at 

www.quantum.com/DXi6800docs

 or the 

DXi690x User’s Guide

 (6-68159) at  

www.quantum.com/

DXi6900docs

.

2

After the Node shuts down, turn off both power switches on the back of 

each Array Module (RBOD) (see 

Figure 1

). Wait until the seven segment 

display on the rear of the module turns off.

Figure 1  Turning Off the Array 
Modules (RBODs)

3

Turn off both power switches on the back of each Expansion Module (EBOD) 

(see 

Figure 2

).

Figure 2  Turning Off the 
Expansion Modules (EBODs)

Port 1

Port 2

ID/Diag

Lnk

Lnk

Power switches

Array Module (rear view)

ID/Diag

Port 1

Power switches

Expansion Module (rear view)