Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement
6-68446-01
April 2016
4
Replacing the DXi6802 or DXi690x Node Rails
Figure 3 Removing the Node
from the Rack
6
Slide the Node forward until the rail standoffs are at the front of the J-slots.
7
Remove the Node from the rack and place it on a level surface.
WARNING:
The DXi6802 Node (including hard drives) weighs 53.3
pounds (24.2 kg). The DXi6900 G1/G2 Node (including hard
drives) weighs 53.0 pounds (24.0 kg). A minimum of two
people are required to lift the chassis.
8
Use a flat head screwdriver to lift the latch release button on the end piece
midpoint and unseat each rail (see
), and then remove the rails from
the rack.
Inner slide rails
Rear rail standoffs
Rear rail J-slots
Slide-release lock button
Lock lever
Locking tab
Locking tab
