Connecting the Drive Interface and Power Cables
3
LTO-3 (Model B), LTO-4 (Model B), LTO-5, LTO-6, and LTO-7
b
Connect the other end of the external SAS interface cable to the SAS connector
on the host server.
Figure 2 SAS Interface
Connectors
5
Connect the supplied AC power cable to the AC power connector on the back panel
of the 1U Rackmount enclosure (see
).
Figure 3 AC Power Connector
6
Connect the other end of the AC power cable to the rack/facility AC power
receptacle.
7
Press the drive power pushbutton switch on the front panel of the 1U Rackmount
enclosure, illuminating the power LED. (see
Figure 4 Power Button
8
Turn on all attached accessory devices, such as printers and other SCSI devices that
you turned off at step 2 of this procedure.
9
Turn on and restart the host server.
SAS connectors
AC power connector
Power button