www.qntmnet.com
This Quick Setup Guide provides step-by-step instructions on how to set up Quantum Networks’
Access Point. After completing the steps described in this Guide, you will be able to install the
Access Point (AP) on site and provide wireless network access to users.
Before You Begin
Your Quantum Networks’ Access Point can work in
“Standalone Mode”
or can be managed by
“Cloud Controller”
.
To manage Access Point by
“Cloud Controller”
, please follow step 5 first and then step 1. For
“Standalone Mode”
, continue with step 1.
Quantum Networks’ Cloud Controller (QN-RUDDER)
is a cloud hosted controller which can
be used to configure, manage & monitor devices associated with it. It can be accessed from
https://cc.qntmnet.com
Package Contents
• Access Point
• Quick Setup Guide
Prerequisites
Internet access
Desktop / Laptop / Handheld device
802.3af / 802.3at PoE Switch / PoE Injector
Connect Access Point
After unpacking Access Point, connect it to Internet source
Plug in Ethernet cable of Access Point
Power on Access Point by using 802.3af / 802.3at PoE Switch / PoE Injector
Note: Access Point must have internet access during initial setup for the first time to activate
the device, warranty and support.
