(8) Speaker
Used to output sounds.
(9) External Jack(for external earphone
or radio programming)
Rotate the jack cover and insert accessory plug
or insert programming cable into the jack to
program the radio via programming software.
(10) Battery
(11) Belt Clip
Used to clip radio on your belt.
(12) Battery Latch
Used to fasten and remove the battery.
(13) Charging Connector
Insert the battery into the charger; connect the
charging connectors with those on the charger
to begin charging.
(1) Antenna
Used to transmit/receive signals.
(2) LED Indicator
The radio LED glows red during transmission
and green during reception; The LED flashes
red when battery voltage is low.
(3) Channel Selector Knob
(4) Power/Volume Control Knob
Rotate the knob clockwise until a "click"
sound is heard to turn the radio on,fully counter
clockwise until a "click" is heard to turn the radio
off.When theradio is on,turn the knob to adjust
volume.
(5) PTT Key
Hold down the [PTT] key to transmit, release
it to receive.
(6) Function Key
The key can be programmed to access the
radio features with the preset type of key pre
ssing through the programming software.
(7) Microphone
Used to input sounds.
