Chapter 1 Installing the ValueLoader
Unpacking the ValueLoader
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
7
Unpacking the ValueLoader
1
Before you begin, clear a desk or table so you can unpack the
ValueLoader. You also need to select an open 2U computer rack location
or a desktop location near the server that is to be the host for the
ValueLoader.
Unpack and inspect the ValueLoader for shipping damage by doing the
following:
1
Clear a table or desk so that you have room to unpack the
ValueLoader.
2
Inspect the shipping box for damage. If you notice any damage,
report it to the shipping company immediately.
Air quality
Minimal sources of particulate contamination.
Avoid areas near frequently used doors and
walkways, stacks of supplies that collect dust,
printers, or smoke-filled rooms.
Caution:
Excessive dust or debris can damage
tapes and tape drives.
Humidity
20-80% RH, non-condensing
Clearance
Back: Minimum of 15.4 cm (6 in)
Front: Minimum of 30.8 cm (12 in)
Sides: Minimum of 5.08 cm (2 in)
Caution:
If the room temperature you are working in differs from
the shipping or storage temperature by 15° C (30° F) or
more, let the ValueLoader acclimate to the surrounding
environment for at least 12 hours before opening the
shipping carton.
Requirement
Description
Summary of Contents for Quantum ValueLoader
