Diagnostics and Troubleshooting
ValueLoader Error Codes
58
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
Table 5 Error Codes
Error Code
Description
Details
3 0 81
Invalid Command Error.
This error indicates that the ValueLoader
received an undefined command or an invalid
parameter with a command.
3 0 82
Device Status Not Suitable To
Execute This Command.
If the robotics are busy, some commands
cannot be executed at the same time. This error
indicates a probable violation. This is not an
error condition, but it does result in
busy
being
reported to the host for the requested SCSI
command.
3 0 83
Inventory Not Valid.
The cartridge inventory is not valid because of
manual changes or previous fatal errors.
Update the inventory using the
Re-inventory
option in the
Configuration
menu (see
power cycle.
3 0 84
Source Empty.
There is no cartridge in the location from which
a cartridge move was issued.
3 0 85
Destination Full.
The location to which a cartridge move was
issued already contains a cartridge.
3 0 86
Import/Export Slot Access
Rejected.
User attempted to access the Import/Export
slot, but media removal was prevented by the
host.
3 0 87
Operation Timeout.
A command did not complete in the required
amount of time.
3 0 88
Communications Error
During Loop-back.
Cycle power on the ValueLoader and attempt
the operation again. If the error recurs, contact
Quantum Technical Support.
3 0 89
System Test Timeout.
There was a communication timeout between
the drive and loader during the System Test.
Summary of Contents for Quantum ValueLoader
