manualshive.com logo in svg

Quantum Scalar i6000, Installation Manual

The Quantum Scalar i6000 is a high-performance tape storage solution designed for large-scale data backup and archiving. Ensure proper installation and operation by referring to the Installation Manual available for free download from 88.208.23.73:8080. This comprehensive manual provides detailed instructions on setting up and maintaining the Scalar i6000.

Share
Download
background image

vi

Contents

9 Setting up Your Library for Access

145

Launching the Remote Client  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  145
Configuring Library Security  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  146

Changing Internal IP Network Addressing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  146
Changing the Library Security Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  148

Accessing the Security Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  148
Configuring Access for Network Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  148
Configuring Access for Remote LMC Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  149
Configuring Access for SNMP and SMI-S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  151

10 Configuring the Library

153

Addressing Configuration Prerequisites  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  153
Logging on to the Library. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  154
Performing Basic Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  156

Deleting the Default Partition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  157
Running the Setup Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  158

Performing Advanced Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  163

Enabling Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  164
Setting Up the Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

Setting up IPv4 Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  166
Setting up IPv6 Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  167

Setting Date and Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  169
Setting up E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  170
Setting up Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  171
Enabling Logical Serial Number Addressing for Drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  175
Using LDAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  176

LDAP Server Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  176
User and Group Access  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  176
OpenLDAP 2.4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  176
Configuring LDAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  177

Working with Library Control Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  180
Creating Partitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  182

Creating Partitions Automatically  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Creating Partitions Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  184
Performing Simple Partition Resource Allocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  188
Performing Expert Partition Resource Allocation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  190
Viewing Partition Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  192

Configuring FC I/O Blade Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  194
Configuring FC Host Port Failover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  198

Enabling a Disabled Target Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  200

Configuring Datapath Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  201
Configuring Switch Zoning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  204
Configuring Host Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  204

FC Host LUN Mapping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  204
Configuring FC Host LUN Mapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  204
Channel Zoning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  208
Configuring FC Channel Zoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  208
SCSI Host LUN Mapping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
LUN Mapping Wizard  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  211

Setting up Control Path and Storage Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  215

Configuring Control Path. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  215
Selecting a Storage Networking Drive  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  217

Summary of Contents for Scalar i6000

































































































































































































































































































































































































Reviews:

No comments

Related manuals for Scalar i6000

IBM TotalStorage DS4800 Installation, User And Maintenance Manual preview
TotalStorage DS4800
Brand: IBM Pages: 250
IBM TotalStorage DS4800 User, Installation And Maintenance Manual preview
TotalStorage DS4800
Brand: IBM Pages: 234
IBM T400 Setup, Operation, And Service Manual preview
T400
Brand: IBM Pages: 136
IBM System Storage DS5020 Overview preview
System Storage DS5020
Brand: IBM Pages: 31
IBM Netfinity EXP300 Hardware Maintenance Manual preview
Netfinity EXP300
Brand: IBM Pages: 93
IBM DS4700 EXPRESS Installation, User'S, And Maintenance Manual preview
DS4700 EXPRESS
Brand: IBM Pages: 270
IBM Ultrastar 36LZX Quick Installation Manual preview
Ultrastar 36LZX
Brand: IBM Pages: 2
IBM DCAS-32160 - Ultrastar 2.1 GB Hard Drive Specifications preview
DCAS-32160 - Ultrastar 2.1 GB Hard Drive
Brand: IBM Pages: 232
IBM System Storage TS3310 Maintenance Information preview
System Storage TS3310
Brand: IBM Pages: 531
Backyard Products GABLE Assembly Manual preview
GABLE
Brand: Backyard Products Pages: 72
Seagate ST31230N/ND Installation Manual preview
ST31230N/ND
Brand: Seagate Pages: 36
Sans Digital ES424X6+BHP Quick Installation Manual preview
ES424X6+BHP
Brand: Sans Digital Pages: 2
KREAFUNK wiTRAY CARE Operation Manual preview
wiTRAY CARE
Brand: KREAFUNK Pages: 34
HGST Ultrastar Serv24 S2122-N24-4 Installation Manual preview
Ultrastar Serv24 S2122-N24-4
Brand: HGST Pages: 36
Accordance Systems araid 3500 User Manual preview
araid 3500
Brand: Accordance Systems Pages: 58
Synology DS3611xs Quick Installation Manual preview
DS3611xs
Brand: Synology Pages: 26
Buffalo TeraStation WSS WS5020N6 User Manual preview
TeraStation WSS WS5020N6
Brand: Buffalo Pages: 115
Tandberg Data SLR AUTOLOADER PROGRAMMER Manual preview
SLR AUTOLOADER PROGRAMMER
Brand: Tandberg Data Pages: 62

Brands by name

Popular brands

Load more brands