Chapter 6 Running the Demonstration Programs
Running the Demo 1 Program
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
99
Running the Demo 1 Program
6
The
Demo 1
program causes the robot to pick a randomly selected
cartridge from its magazine slot and place it in another randomly
selected magazine slot.
To run the
Demo 1
program:
1
Verify that at least one magazine is installed in the library and
that at least one cartridge is present.
2
Access the
Demo Programs
screen (see
).
3
Press the
Up
or
Down
buttons to select
Demo 1
.
4
Press
Select
.
The
Demo 1
program starts. This program continues until you
press the
Stop
button.
5
If desired, include the drives or the fixed slot in the test:
a
Press the
Level
button to select the level where the desired
drive or fixed slot is located.
b
Press
Drive 1
or
Drive 2
to include a drive.
c
Press
Fixed
to include the fixed slot.
6
To stop the program, press
Stop
.
The GUI displays a status screen listing the demonstration
program number, the number of cycles completed, and the
status of the test: pass or fail.
7
Press
Back
to return to the
Demo Programs
screen.
Summary of Contents for Sun StorEdge L100
Page 10: ...Figures x Sun StorEdge L25 Tape Library and Sun StorEdge L100 Tape Library User s Guide...
Page 12: ...Tables xii Sun StorEdge L25 Tape Library and Sun StorEdge L100 Tape Library User s Guide...
Page 192: ...Index 176 Sun StorEdge L25 Tape Library and Sun StorEdge L100 Tape Library User s Guide...
