9
BASIC OPERATION INSTRUCTIONS
Flip-forward Back (Optional)
The flip-forward back allows the user to flip the seatback
forward for easier transportation.
See figure 5. Your seating
system may be equipped with one of two flip-forward backs.
To flip the seatback forward:
1. Remove the detent pin (
see figure 6) OR rotate the
release lever on both back canes toward the rear of the
seat to disengage the back.
See figure 7.
2. Fold the seatback down.
To return the seatback to an upright position:
1. Lift the seatback up and place in the upright position.
2. Reinstall the detent pin and ensure all components are
secure (
see figure 6) OR rotate the release lever on
both back canes toward the front of the seat to latch the
back canes. Ensure a red sticker on the release lever is
not visible.
See figure 7.
Ensure the detent pin is properly inserted OR the
release lever is properly latched before sitting in your
power chair.
WARNING!
Figure 6. Flip-foward Back (Detent Pin)
Figure 7. Flip-forward Back (Release Lever)
Red Sticker
Figure 5. Flip-forward Back (Disengaged)
Summary of Contents for TRU-BALANCE 3
Page 24: ...24 BASIC OPERATION INSTRUCTIONS...
Page 25: ...25 BASIC OPERATION INSTRUCTIONS...