QK-A015-RX Manual
V1
2 of 4
2020
1. Introduction
The QK-A015-RX splitter allows one VHF antenna to be shared between,
•
VHF radio
•
AIS receiver and
•
AM/FM radio
The A015-RX allows the one VHF antenna to provide the following functions:
•
Reception of VHF radio, AIS messages and AM/FM radio.
•
Transmission from VHF radio.
•
Straight forward connection to all relevant devices, with no configuration required.
•
VHF radio always has priority and can always transmit in the case that the power to the
splitter fails
•
Low power consumption.
The A015-RX is an active splitter. This is important, as unlike many splitters that cause signal loss, the
active splitters actually provide a signal gain. The A015-
RX’s built-in pre-amplifier amplifies the AIS,
VHF, AM/FM signals, thereby increasing the receiver
s’ range.
Please note:
The A015-RX is compatible with AIS receivers only, it is not designed for AIS
transponders/transceivers.
For AIS transponders/Transceivers you would require the A015-TX
2. Connections
The A015-RX has five connections:
•
Power cable:
connect to 12V-24V DC power
•
VHF Antenna:
SO239 connector for VHF antenna
•
VHF radio:
SO239 connector for VHF radio
•
AIS:
BNC connector for the output of the AIS signal
•
FM/AM:
BNC connector for the output of the FM/AM radio signal