background image

Quark-Elec Manual

https://www.quark-elec.com

10 of 15

2016

V1.0

Note: In Ad-hoc mode, the IP address should not be changed and the password should

between 8 to 12 characters.

2.5 WiFi output in Station mode

More and more vessels have a wireless onboard network for access to the internet. In most

cases the network is created by using a 3G/4G wireless router with cellular modem. iOS
devices, tablets, mobile phones can all access the internet to obtain weather forecasts,

send/receive email and access many other internet services via onboard WiFi.

Although switching between the QK-A031 WiFi network and the onboard wireless network is

simple and quick, it can be advantageous to integrate the two networks and allowing operators

to receive the QK-A031 multiplexer output through the onboard WiFi network. This way,

operators can access the internet while receiving the NMEA 0183 messages without having to

switch between the 2 access points. To work in this way, operators should set up QK-A031 in

Station mode through QK-A031 configuration panel.

After the proper SSID and password setup, QK-A031 should be reset to activate the settings.

IP address, Gatway, Net Mask and Port can be left blank if no fixed IP address is needed.

Figure 6 Station mode settings

Summary of Contents for QK-A031
















Reviews: