To select a mode, see the following table.
Platform
Instructions
PC
• The “Tools->eBeam Hardware” menu in eBeam Software’s
Whiteboard mode application. See “Using The Whiteboard
Mode Application” on page 12.
• The Status icon right-click menu in eBeam Software’s
Whiteboard mode application. See “Using The Whiteboard
Mode Application” on page 12.
• eBeam Software’s Windows taskbar menu.
Macintosh OS 9.X
• The “Tools->eBeam Hardware” menu in eBeam Software’s
Whiteboard mode application. See “Using The Whiteboard
Mode Application” on page 12.
• eBeam Software’s control strip menu.
Macintosh OS 10
• The System menu in menu in eBeam Software’s Whiteboard
mode application. See “Using The Whiteboard Mode
Application” on page 12.
• The Status icon menu in menu in eBeam Software’s
Whiteboard mode application. See “Using The Whiteboard
Mode Application” on page 12.
• The eBeam System Settings icon from the docklet. File
menu.
5.
The first time you use any mode you are prompted to calibrate that mode
immediately. Click the Calibrate button to automatically open the calibration
wizard.
Manually starting is described in:
•
“Calibrate Whiteboard Mode” on page 12 for Whiteboard mode.
•
“Using Quartet Portable IdeaShare with a Flip Chart” on page 6 for Flip Chart
mode.
•
“Projection/Virtual Touchscreen Mode” on page 16 for Projection mode.
6.
Set up the Shortcut Strip if you are using either Whiteboard mode or Flip Chart
mode. Shortcut Strip setup is described in:
•
“The Whiteboard Mode Shortcut Strip” on page 17.
•
“The Flip Chart Mode Shortcut Strip” on page 18.
Chapter 3
Page 11
https://www.supplychimp.com
