QTrack
™
Antenna System
8
Quasonix, Inc.
3.3.1
2U Controller Rear Panel Connections
Rear panel connectors are the same for all 2U Controllers. Connectors are present whether the feature is ordered or
not. The electrical interface connectors are shown in Figure 7.
Figure 7: 2U Rear Panel
Functional descriptions and electrical characteristics for each connector located on the rear panel are described in
Table 2.
Table 2: 2U Rear Panel Connectors
Name
Description
USB
USB-A 3.0 (blue connector) for local mouse and keyboard
PC HDMI
Local connection to monitor for GUI
Positioner
D38999/20WJ43SN multi-pin connector for control umbilical
USB
USB-A 2.0 (white connector) for local mouse and keyboard
Camera HDMI
Video connection for integrated camera (CA option)
VGA
Female HD-15, Standard VGA video
Communication
Male DB-9, RS-232 comm port
Ethernet
RJ-45, Enables network access
AGC In
BNC, 1 kOhm, AGC feedback from receiver
AM In
BNC, 75 Ohm, AM feedback from receiver
TX Clock In
BNC, 75 Ohm TTL, Clock input for optional integrated uplink transmitter
TX Data In
BNC, 75 Ohm TTL, Data input for optional integrated uplink transmitter
Power (far right side)
IEC-320-C14, Supplies AC power to the unit, 100 to 240 VAC, 50/60 Hz
