background image

Mechanical Outline

Specifications

Model Selection Guide

Block Diagram

Access Point

Infrastructure Access Point/Wireless Router/Client, supports up to 8 clients

Technology

IEEE 802.11b/g, WiFi compliant

Frequency 

2.4 ~ 2.4835 GHz (US/Canada/Europe)

2.4 ~ 2.497 GHz (Japan)

Modulation Technology 

DSSS, CCK, OFDM

Modulation Type 

DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM

Network Access Modes

Access Point, Infrastructure, Ad Hoc

Channels 

USA/Canada: 11 channels

Europe: 13 channels

France: 7 channels

Japan: 14 channels (13 channels for 802.11g)

Wireless Data Rate

802.11b = 11, 5.5, 2, 1 Mbps

802.11g = 54, 48, 36, 24, 18, 12, 9, 6 Mbps

MAC

CSMA/CA with ACK, RTS, CTS

Network Protocols 

TCP/IP, ARP, ICMP, DHCP, DHS, UDAP, TFTP, UDP, PING

Receive Sensitivity

54Mb/s     =   -75dBm

36Mb/s     =   -82dBm

18Mb/s     =   -88dBm

6Mb/s     =   -93dBm

11Mb/s 

=   -88dBm

1Mb/s       =   -98dBm

Security Protocols 

Disabled, WEP 64 & 128bit, WPA (TKIP), WPA (AES), WPA2  (AES), 802.1x (EAP) Supplicant 
802.11I, WPA & WPA2 Enterprise supplicants (EAP-TLS, EAP-TTLS(MSCHAPv2), 
EAPTTLS(MDS5), EAP-PEAPv0(MSCHAPv2, LEAP), EAP-FAST, LEAP)
Supports Certificates and Private Key Upload and Storage (Multiple)
*Enterprise and EAP available in client mode only

Antenna

Two (2) U.FL coaxial connectors, 50 ohms, supports Rx and Tx diversity

Supply

3.3VDC +/-5%, 850mA (MAX)

Supply In-rush Current

3000mA (MAX) for 20ms

DC Characteristics

Operating Current (Tx, 802.11g)  = 240mA Typ.

Operating Current (Rx, 802.11g)  = 310mA Typ.

Power Save (Doze) = TBD mA Typ.

Power Down (Sleep) = TBD mA Typ.

Environmental

Operating Temperature: -20

°

C - +85

O

C, Storage: -55

O

C - +150

O

C

Relative humidity: 5% - 95% (non-condensing)

Vibration: 20G peak-to-peak, 20Hz-2KHz swept

Shock: 1500G peak-to-peak, 0.5mS duration

Interfaces

Dual UART (960KBAUD), RS232/422/485, SPI (1bit/20MHz), 
10/100 Ethernet (Infrastructure Bridge Mode, NAT3 Router Mode), PortFlex

Digital I/O 

8 GPIO

LED Indicators

4 indicator LED signals (RF_ACT, POST, CONNECT, RF_LINK), Signal Strength

Connector

36 pin High Density SMT connector from Hirose (DF12-36DS-0.5V), 4mm Height 

Agency Approvals 

North America: FCC Title 47 Part 15 Class B Sub C Intentional Radiator, IOC RSS210

Europe: CE ETSI EN300 328

RoHS & WEEE compliant 

Model #

Description

APMG-Q551

802.11b/g, Industrial Access Point/Wireless Router/Client; 10/100 Ethernet, UART,
SPI and RS-232/422/485 wired interfaces;  WPA/WPA2 Enterprise Security

Rev. B 2/2012

© 2012 B&B Electronics Mfg. Co.

707 Dayton Road | P.O. Box 1040 | Ottawa, IL 61350

+1 815.433.5100 | www.bb-elec.com

Reviews: