Quatech DSC-100 User Manual Download

Page: 5 / 38

10 Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9 Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8 PCI Resource Map

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 External Connections

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.3.1 QTPCI.EXE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.3 DOS and other operating systems

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2 OS/2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1 Windows NT

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 Other Operating Systems

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.6.1 Changing Resource Settings with Device Manager

. . . . . . . . . . . . .

5.6 Viewing Resources with Device Manager

. . . . . . . . . . . . . . . . . . . . . . . .

5.5 Using the "New Hardware Found" Wizard

. . . . . . . . . . . . . . . . . . . . . .

5.4 Windows 1995

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3 Windows 98

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2 Windows 2000

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1 Windows Millennium

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Windows Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4.2 Clock Rate Multiplier

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4.1 Enhanced Serial Adapter Identification

. . . . . . . . . . . . . . . . . . . . . . .

4.4 Options Register

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.3 Interrupt Status Register

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2 Enabling the Special Registers

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1 Base Address and Interrupt Level (IRQ)

. . . . . . . . . . . . . . . . . . . . . . . . .

4 Address Map and Special Registers

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Hardware Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3 Force High-Speed UART Clock (X2, X4, or X8)

. . . . . . . . . . . . . . . . . . .

2.2 Enable Scratchpad Register (SPAD)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 Factory Default Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Hardware Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1.1 "IND" Option --- Surge Suppression Upgrade

. . . . . . . . . . . . . . . . .

1.1 Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 General Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of Contents for DSC-100







































Search results

Summary of Contents for DSC-100

Reviews:

Related manuals for DSC-100

Brands by name

Popular brands

Quatech DSC-100, User Manual

Search results

Summary of Contents for DSC-100

Reviews:

Related manuals for DSC-100

Brands by name

Popular brands