Quatech DSC-200 User Manual Download

Page: 5 / 44

6.1 OS/2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 Other Operating Systems

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.6.1 Changing Resource Settings with Device Manager

. . . . . . . . . . . . .

5.6 Viewing Resources with Device Manager

. . . . . . . . . . . . . . . . . . . . . . . .

5.5 Windows NT

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.4 Windows 1995

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3 Windows 98

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.2 Windows 2000

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1 Windows Millennium

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Windows Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.5.2 Clock Rate Multiplier

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.5.1 Enhanced Serial Adapter Identification

. . . . . . . . . . . . . . . . . . . . . . .

4.5 Options Register

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4 Quatech Modem Control Register

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.3 Interrupt Status Register

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2 Enabling the Special Registers

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1 Base Address and Interrupt Level (IRQ)

. . . . . . . . . . . . . . . . . . . . . . . . .

4 Address Map and Special Registers

. . . . . . . . . . . . . . . . . . . . . . .

3 Hardware Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3.2 Force High-Speed UART Clock (X2, X4, or X8, J3-J5)

. . . . . . . .

2.3.1 Enable Scratchpad Register (SPAD, J2)

. . . . . . . . . . . . . . . . . . . . . .

2.3 Clock Rate and Optional Registers

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2.5 RXEN0_SEL, RXEN1_SEL (J16, 23)

. . . . . . . . . . . . . . . . . . . . . . . . . .

2.2.4 TGL0_SEL1,0, TGL1_SEL1,0 (J15,14,22,21)

. . . . . . . . . . . . . . . . . .

2.2.3 RCLK0_SEL, RCLK1_SEL (J13, 20)

. . . . . . . . . . . . . . . . . . . . . . . . . .

2.2.2 AUX0_SEL1,0, AUX1_SEL1,0 (J12,11,19,18)

. . . . . . . . . . . . . . . . . .

2.2.1 CTS0_SEL, CTS1_SEL (J10,17)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Full-duplex/Half-duplex Operation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 Signal Connections

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Hardware Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1.1 "IND" Option --- Surge Suppression Upgrade

. . . . . . . . . . . . . . . . .

1.1 Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 General Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of Contents for DSC-200













































Search results

Summary of Contents for DSC-200

Reviews:

Related manuals for DSC-200

Brands by name

Popular brands

Quatech DSC-200, User Manual

Search results

Summary of Contents for DSC-200

Reviews:

Related manuals for DSC-200

Brands by name

Popular brands