5675 Hudson Industrial Parkway, Hudson, OH 44236
1.800.553.1170
●
www.quatech.com
SPECIFICATIONS
LAN interface
10/100 Base T (IEEE 802.3) auto-negotiation,
auto MDI/MDIX and RJ-45 Ethernet connector
Serial interface (RS-232 or RS-232/422/485
)
Each port is a fully independent asynchronous
DTE serial port, with:
❖
Full modem control
❖
Hardware flow control
❖
Optional 10-pin RJ-45 adapters for
DB-9M connections are available
Speed:
Serial port supports data transfer speeds of
up to
921.6
Kbps, depending on flow control
protocols used, cable length and condition,
and other factors
Certifications
FCC, Industry Canada, CE
Serial Connectors
DB-9 Male, External View
Signal Information:
Surge Suppression Option
(Standard on 5V Models)
Surge suppressor is capable of sustaining up
to 40-A peak, 8 x 20-µs transient surges, a
clamping voltage of 30V (RS-232 mode) or
15.5V (RS-422/485 mode), and a peak energy
dissipation of 0.1 Joules
Protocols and software
Management: UDP, TCP/IP, HTTP, DHCP,
ARP, SNMP
Initial IP address configuration: DHCP, static IP
set within the Installation Wizard or a custom
UDP datagram utility (with command line inter-
face) for unattended installations
Quatech provides several ways to manage,
monitor and configure wireless device servers
after installation:
v
Windows® Device Manager (Quatech
Device Manager in Windows NT)
v
On-board HTML pages accessible from
a standard web browser
v
Simple Network Management Protocol
(SNMP)
v
Intellisock™ TCP socket services
Communication modes: Normal, Tunneling,
Raw TCP, Auto TCP, Raw UDP or Intellisock
TCP socket services
Freescale and the Freescale Enabled logo are
trademarks of Freescale Semiconductor Inc.
PowerPC is a registered trademark of IBM Corporation
and is used under license.
Microsoft, Windows and the Windows logo are
registered trademarks of Microsoft Corporation.
DPAC Technologies is a trademark of DPAC
Technologies, Inc.
Prism is a trademark of Conexant Systems, Inc.
Intellisock is a trademark of Quatech, Inc.
Rev 1.0, 03.10.05
2-wire mode supported, see owner’s manual
OS support
Device drivers provided for Windows NT,
Windows 2000, Windows XP, and Linux
Raw TCP, Raw UDP, Tunneling, AutoTCP and
Intellisock
TM
modes are O/S independent
Please check Quatech’s website for the latest
O/S driver support information
Power Supply
+5V, 2A (10 W) max DC, with auto-sensing
AC adapter provided for 100VAC–240VAC,
50Hz–60Hz operation
Typical power consumption: +5V, 0.7A(3.5W)
Hardware
Conexant Prism™ 3 Wireless Chipset
CPU: Freescale™ PowerPC®
SDRAM: 8 MB
FLASH Memory: 2 MB (FLASH is field
upgradeable)
+5V models limited to 500mA max current
draw per port (fuse-protected)
DCD
1
AuxIn-
RxD
2
RxD+
TxD
3
TxD+
DTR
4
AuxOut-
GND
5
GND
DSR
6
RxD-
RTS
7
CTS
8
AuxIn+
RI
9
TxD-
RS-232
DB-9
Pin #
RS-422/485
4 wire mode
Model
Ports
Interface
SSEW-100D
1
RS-232
SSEW-100D-5V
1
RS-232 w/+5V
SSEW-400D
1
RS-232/422/485
DSEW-100D
2
RS-232
DSEW-100D-5V
2
RS-232 w/+5V
DSEW-400D
2
RS-232/422/485
Wireless Specifications
Technology: IEEE 802.11b DSSS, WiFi Compliant
Frequency:
2.4 – 2.4835 GHz (US/Can/Europe/Japan)
2.471-2.497 Ghz (Japan)
Channels:
USA & Canada: 11 channels
Europe: 13 channels
Japan: 14 channels
France: 4 channels
Data Rates Supported: 11, 5.5, 2, 1 Mbps
RF Power: 65 mW (Typical)
Sensitivity:
-82 dBm @ 11Mbps, -86 dBm @ 5.5 Mbps
-88 dBm @ 2 Mbps and -90dBm @ 1 Mbps
Security: WEP standard encryption, 64/128-bit
WPA encryption available soon
Antenna: 2.2 dBi Rubber Duck Antenna, supplied
and attached to RP-SMA bulkhead connector
Environment
Operating: 0° C to 70° C
Storage: –40° C to 70° C
Relative Humidity: 10% to 90% non-condensing
Dimensions
Length: 4.69” (11.91 cm)
Width: 3.33” (8.46 cm)
Depth: 1.18” (2.99 cm)
Weight: 15.1 oz. (428.0 g)
Accessories
Surge Suppression
DB-9 to RJ-45 Adapters
International Power Cords
DIN Rail Mounting Kit
RS-422 & 485 Termination Blocks
