Quatech SDS Quick Start Guide
June 2006
100-2000-162
Page 8
Step
Procedure
Description
Step 7
Follow the prompts of the Install
Wizard to quickly install the device
drivers for your new SDS.
The install process is explained in
detail in the SDS User’s Manual,
which you can find on the SDS
installation CD-ROM, or at Quatech’s
website:
http://www.quatech.com
.
Step 8
Repeat steps 4-7 on any other
computers that will use the COM
ports on your new SDS.
Each serial port on the SDS is
independently addressable over the
network.
Step 9
You can now use the SDS serial
ports just like you would use a built-
in serial port.
See the SDS User’s Manual for
details on many other modes of
operation.
Configuring the SDS using a Web interface
If you wish to make changes to the configuration at a future time, simply
enter the IP address of the Serial Device Server into the address bar of your
computer’s Web browser.
DOC-SDS-QSG
High Performance
Serial Device Servers
Quick Start Guide