May/07
MN3000000034
4
For Windows® Vista
1.
Don’t plug in the SS-USB-100 into the USB connector of your
computer until driver installation is complete.
2.
Please insert the driver CD that came with your SS-USB-100 into
your CD-ROM Drive.
3.
At the Windows desktop click
Start
, then
Run
.
4.
Type
D:\Drivers\USB\SS-USB-100\Setup.exe
, then click
OK
.
(Change
D:
to match your CD-ROM drive letter)
5.
Follow the on-screen instructions to complete the installation.
6.
Plug the SS-USB-10 into your computer’s USB port.
7.
Open “Device Manager” under System Properties and you should
see the device listed as
“Prolific USB-to-Serial Comm Port …”
.
8.
The SS-USB-100 is now ready to use.
Changing COM Port Number
Some serial devices need a special COM port in order to work. If your
serial device works properly, do not change this setting.
1.
From the
Device Manager
window double click
Ports(COM &
LPT)
, then double click the
Prolific USB-to-Serial Comm Port
you want to change.
2.
Click
Port Settings
tab and click
Advanced…
button.
