The status page displays the current status of the USB devices attached.
•
Device Status:
•
Vendor Id
•
Product Id
•
Class Id
•
Peer-ip address
•
Status
This status page is updated automatically every 10 seconds and it shows the device connected to the
USB Device server board.
The Device Status table shows the Vendor Id, Product Id, Class, Peer-IP and the Status of the Device
connected. The Peer-IP is the IP Address of the computer on which the device is currently accessed.
Whenever any Device is Busy the Status of that device changes to “BUSY” and whenever it is not
being used it changes to “FREE” as shown below.
3.3.2.
Upgrade Page.