May/07
MN2000000042
4
with your motherboard manufacturer if you are unsure).
Hardware Installation
General instructions for installing the card are provided below. Since
the design of your system may vary, refer to your system’s reference
manual for further information, if needed.
1.
Turn OFF the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
Carefully align the card to the select PCIe slot and push the board
down firmly, but gently, until it is well seated.
5.
Replace the slot bracket’s holding screw to secure the card.
6.
Connect the XCD-B/PCIE-ST ExpressCard Adapter’s USB port to
an available USB port on the computer with the USB A-A Extension
Cable. You may need to leave a bracket cover off to achieve this if
no USB slot is available directly on the motherboard. NOTE: This
step must be completed for your ExpressCard adapter to function
properly.
