background image

QUATRO    

Air Technologies Inc. 

11 

 

9- SPECIFICATIONS 

Nominal Airflow (Single Motor) 

110 CFM 

Nominal Airflow (Double Motor) 

220 CFM 

Nominal Airflow (Brushless Motor) 

280 CFM 

Approximate Dimensions: 

28.5" (724mm) High x 12.75" (324mm) Wide x 15.75" (400mm) Deep 

6” Filter Section Models 22” (508mm) High 

Voltage/Phase/Frequency, Current, Power  

Single Brush Type 115/1/60, 7 Amps, 825 Watts 

Single Brush Type 230/1/50, 4 amps, 750 Watts 

Double Brush Type 115/1/60, 12 Amps, 1650 Watts 

Double Brush Type 230/1/50, 8 amps, 1500 Watts (Operating at 60Hz) 

Brushless 115/1/60:  6.8 amps, 1100 Watts 

Brushless 230/1/50: 3.4 amps 1200 Watts (Operating at 60Hz) 

Approx. Weight: 

70lbs (27kg) w/o filters 

100lbs (45kg) with filters 

10- GENERAL REPLACMENT PARTS 

Qty 

Description 

Part 

Power Cord 120v 

E500 

Power Cord (Euro 230V) 

E130 

Remote Cable 

AE427 

Cover Gasket Roll (40') 

H006 

11- WARRANTY  

QUATRO Air Technologies warrants its equipment to be free from defect in material and workmanship under normal use 
and service for a period of one year from date of shipment.  QUATRO's obligation under this warranty shall be limited to 
replacing any parts, thereof, which shall be demonstrated to have been defective.  This is expressly in lieu of all other 
warranties, express or implied, including the warranties of merchantability and fitness. 
QUATRO claims no warranty as to merchantability or as to the fitness of the merchandise for any particular use and shall 
not be liable for any loss or damage.  No person, firm or corporation is authorised to assume for QUATRO any other liability 
in connection with the sale of these goods.  Equipment, parts and material manufactured by others and incorporated in 
QUATRO's equipment are warranted by QUATRO only to the extent of the original manufacturer's liability to QUATRO Air 
Technologies Inc. 

 

Conditions and Limitations: 

This warranty does not cover

 abuse, misuse, maintenance negligence, improper assembly, acts of vandalism, acts of 

God, fear wear, modifications of the equipment or installation of a part not recommended by QUATRO Air Technologies, as 
well as operation of the equipment at voltages other than those specified by QUATRO Air Technologies Inc.

  

 

IMPORTANT NOTE FOR UNITS EQUIPPED WITH “INFINITY” MOTORS:

 In cases of heavy production 

(continuous 

hours of daily operation)

, the brushes on the INFINITY Motors may wear before the warranty is over.  

Please note this is NOT considered a warranty issue. Motor life is a function of hours used and filter maintenance. 
They are designed to operate 2000-3000 hours and then replaced.  

In some extreme cases motor life can even be less than 2000 hours and this is usually due to the system being run at a 
high pressure (dirty filters) for extended periods of time. 

 

Warning: 
This is a class A product. In domestic environment, this product may cause radio interference in which case the user may be 
required to take adequate measures. 

 

 

 

 

For Technical Assistance, call QUATRO Air Technologies inc. at 

(514) 630-4444 (in Montreal, Canada). 

 

Please ensure that you have your 

equipment serial number

 available when calling. 

 

Summary of Contents for 425L















Reviews: