QUATRO
Air Technologies Inc.
SPM
-----------------------------------------------------------------------------------------------------
”We Make Clean Air”
30 Hymus Boulevard, Montreal, Quebec, H9R 1C9 Tel.: (514) 630-4444 Fax: (514) 630-4454
info@quatro-air.com website: www.quatro-air.com
2
8.0
EQUIPMENT MAINTENANCE PROCEDURES
Proper maintenance is critical in extending life of unit. The information presented below outlines basic maintenance procedures ensuring the
SPM
unit will provide
trouble-free operation in future. The
SPM
is designed to allow quick access to the filters.
Blowers and motors which
DO NOT
require service on a regular basis, are located underneath the unit.
9.0
TROUBLESHOOTING
Symptoms
Possible Cause
Suggested Solution
Unit will not start
- Faulty Power supply
- Blown fuse
- Unit not plugged into receptacle
- Check breaker box
- Replace fuse
- Plug unit in
Excessive noise
- Blower wheel contacting blower, housing or cone
- Motor bearings are worn
- Realign/replace wheel
- replace motor
Insufficient airflow
- Obstruction in system
- Clogged Dust Pad
- Clogged Filter Bag
- Clogged HEPA Filter
- Remove obstruction
- Replace filters
- Replace filters
- Replace filter
Motor Shuts off, then back on after 30 minutes
- Motor Amp Draw too high
- ensure filter is in place
Excessive airflow
- Filter not in place
- Install filter
10.0
WARRANTY
QUATRO Air Technologies warrants its equipment to be free from defect in material and workmanship under normal use and service for a period of one year from
date of shipment. QUATRO's obligation under this warranty shall be limited to replacing any parts, thereof, which shall be demonstrated to have been defective.
This is expressly in lieu of all other warranties, express or implied, including the warranties of merchantability and fitness.
QUATRO claims no warranty as to merchantability or as to the fitness of the merchandise for any particular use and shall not be liable for any loss or damage. No
person, firm or corporation is authorised to assume for QUATRO any other liability in connection with the sale of these goods. Equipment, parts and material
manufactured by others and incorporated in QUATRO's equipment are warranted by QUATRO only to the extent of the original manufacturer's liability to QUATRO
Air Technologies Inc.
Conditions and Limitations:
This warranty does not cover
abuse, misuse, maintenance negligence, improper assembly, acts of vandalism, acts of God, fear
wear, modifications of the equipment or installation of a part not recommended by QUATRO Air Technologies, as well as operation of the equipment at voltages
other than those specified by QUATRO Air Technologies Inc.
