IT IS STRONGLY RECOMMENDED THAT THE ENTIRE MANUAL IS READ AND UNDERSTOOD BEFORE OPERATING YOUR
MOVER, THIS ENSURES PROPER SETUP AND SAFE USE. THIS QUICK START GUIDE PAGE ACTS AS A QUICK POINT OF
REFERENCE FOR THE REGULARLY USED FUNCTIONS OF THE HANDSET.
1. Turn caravan isolation key to the on position.
2. Press handset button Fig.1.C twice quickly.
3. When all icons are solid on the home screen, the mover is ready to operate.
1. Press handset button Fig.1.C twice quickly
2. Turn caravan isolation key to the off position.
1. Press and hold handset button Fig.1.C for three seconds to begin engaging,
once completed the handset will return to the home screen automatically.
1. Press and hold handset button Fig.1.C for three seconds to begin disengaging,
once completed the handset will return to the home screen automatically.
1. Move thumb stick Fig.1.B progressively in the direction of travel.
2. Press thumb stick Fig.1.C once to flip direction of travel if required.
Handset not powering on (no information on display).
Replace handset batteries. Failing this, contact manufacturer.
Magnifying glass icon showing in bottom left corner of screen.
This indicates that the handset is searching for the control box and has not yet connected. Ensure the isolation key is switched
on and the control box within the caravan is receiving power (LED lights on). If the handset does not pair within 10 seconds (Icon
should change to smiling face), press thumb-stick button Fig.1.B two times to enter pairing mode and hold within 10cm of the box.
No LED lights showing on control unit within caravan.
This indicates a power issue. Ensure that the isolation key has been turned to the “on” position and that the battery is fully charged
and functioning properly. Failing this, please contact manufacturer.
The handset pairing process has been followed and both the handset and control box are paired (home screen icons are now
solid) but the system will still not operate.
Check the handset screen or control box within the caravan for an indication of the error code using page 8 in this manual as a
guide.
The caravan will move for a short distance but then stops.
Check the handset screen or control box within the caravan for an indication of the error using page 8 in this manual as a guide. If
the mover system moves for a short distance this is usually a power related issue (battery). Ensure that the battery is fully charged
and is working properly.
Refer to pages 2 & 3.
Refer to pages 9 & 10.
Quick Start Guide
Fig.1
B
D
C
A
Power On
Power Off
Engage Mover (Auto Mover Only)
Manoeuvring
Disengage Mover (Auto Mover Only)
Basic Troubleshooting - See page 8 for more info.
Wiring Diagrams - Two Motor Setup (Single/Twin)
Wiring Diagrams - Four Motor Setup (AWD)
