IT IS STRONGLY RECOMMENDED THAT THE ENTIRE MANUAL IS READ AND UNDERSTOOD BEFORE OPERATING YOUR
MOVER, THIS ENSURES PROPER SETUP AND SAFE USE. THIS QUICK START GUIDE PAGE ACTS AS A QUICK POINT OF
REFERENCE FOR THE REGULARLY USED FUNCTIONS OF THE HANDSET.
1. Turn caravan isolation key to the on position.
2. Press handset button Fig.1.C twice quickly.
3. When all icons are solid on the homescreen, the mover is ready to operate.
1. Press handset button Fig.1.C twice quickly
2. Turn caravan isolation key to the off position.
1. Press and hold handset button Fig.1.C for three seconds to begin engaging,
once completed the handset will return to the home screen automatically.
1. Press and hold handset button Fig.1.C for three seconds to begin disengaging,
once completed the handset will return to the home screen automatically.
1. Move thumb stick Fig.1.B progressively in the direction of travel.
2. Press thumb stick Fig.1.C once to flip direction of travel if required.
Handset not powering on (no information on display).
Replace handset batteries. Failing this, contact manufacture.
Icons on home screen flashing, mover not operating.
Ensure isolation key is on, and that lights are showing on the control unit within the caravan. If isolation switch is on and the control
box is receiving power but the system still does not operate follow the handset pairing process explained on page 6. Failing this,
please contact manufacturer.
No LED lights showing on control unit within caravan.
This indicates a power issue. Ensure that the isolation key has been turned to the “on” position and that the battery is fully charged
and functioning properly. Failing this, please contact manufacturer.
The handset pairing process has been followed and both the handset and control box are paired (home screen icons are now
solid) but the system will still not operate.
Check the handset screen or control box within the caravan for an indication of the error code using page 7/8 in this manual as a
guide.
The caravan will move for a short distance but then stops.
Check the handset screen or control box within the caravan for an indication of the error using page 7/8 in this manual as a guide. If
the mover system moves for a short distance this is usually a power related issue (battery). Ensure that the battery is fully charged
and is working properly.
Refer to pages 2 and 3.
Refer to pages 9 & 10.
Quick Start Guide
Fig.1
B
D
C
A
Power On
Power Off
Engage Mover (Quattro 600 Auto Only)
Manoeuvring
Disengage Mover (Quattro 600 Auto Only)
Basic Troubleshooting - See page 8 for more info.
Wiring Diagrams - Two Motor Setup (Single/Twin)
Wiring Diagrams - Four Motor Setup (AWD)
QUATTRO500_ELECTRONICS_UM.indd 2
15/08/2019 16:47:53
