COCOON
54F01-0100x
4. Assembling the bed
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
info@quax.eu
23
Step 4.1
: Use both sides with
bars
4
and four connectors
C
Tighten a connector (
C
) in the
outer drillings at the bottom of the
inside of a side with bars (
4
).
Step 4.2
: Use the parts from step
4.1
, both cross bars
2
, four minifi x
I
and ten wooden dowels
G
.
Push fi ve wooden dowels (
G
) into the drillings on the outside of the cross bars (
2
). Push two minifi x (
I
) into the holes
at the bottom of the cross bars. Push the cross bars with their dowels into drillings and onto the connectors of a side
with bars, tighten the minifi x. Push the other side with its connectors into the holes and on the dowels of the cross bars.
Tighten the minifi x.
