LOFT
54F01003C
4. Assembling the bed
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
info@quax.eu
29
Step 4.1
: Use both headboards
P1
, four legs
P4
and eight bolts
E
. Use both sides with bars
P2
and eight cylindrical nuts
C
. Use the assembled parts of this step, eight bolts
D
and the four eye pins
H
.
Place the feet (
P4
) on the provided drillings on the headboards (
P1
). Push two bolts (
E
) into the holes of each leg and
fasten them into the nuts of the headboards. Push two cylindrical nuts (
C
) into the drillings at the top and bottom of the
ends of both sides with bars (
P2
). Place a headboard with its drillings on the holes of the sides with bars. Push four bolts
(
D
) in the drillings on the headboard and tighten in the nuts of the sides with bars. Repeat with the other headboard. Push
the eye pins (
H
) into the drillings of the headboards. Attention : use holes at the same height.
