First steps
First dreams
Quax
®
www
.quax.eu
info@quax.eu
4. Assembling the cradle
Berceau
Cradle
Kinderwieg
Wiege
NORDIC
01 01 56xx
17
Step 1 :
Use parts
A
, B and eight large bolts
E
Place the large bolts (
E
) in the provided openings on the upperside and the bottom of the
legstructures (
B
). Insert the sides (
A
) between the legstructures and pull the bolts one by
one backwards and push them back into the openings of the sides. The sides are now
hanging free between the legs.
Step 2 :
Use the parts of step
1
and eight cylindrical nuts
F
Insert one by one the cylindrical nuts (
F
) in the provided openings of the sides (
A
). Pay
attention that the opening in the nut faces the bolt. Tighten slightly with the hexagonal key
(H). Repeat this action for the remaining bolts.
Step 3 :
Use the parts of step
2
, the bottom
J
, four crochet hooks
D
, four spacers
G
, four
short bolts
C
and four nuts
K
Push the crochet hooks (
D
) in the provided openings on the sides (
A
). Insert the bottom
(
J
) into the bed and let it rest on the crochet hooks. Push a short bolt (
C
) into an opening
of the base and the underlying crochet hook, place one spacer (
G
), a nut (
K
) and thighten
slightly. Repeat for the remaining three bolts.
Step 4 :
Finally fasten all large bolts fi rmly (
E
- step 1)
