RADARAY FOUL DETECTOR MANUAL
400-088-006-01 Rev. A
Page 7
Once you have finished selecting the appropriate setting for the foul detectors, press the
[EXIT]
button twice to return to the
Main Screen
.
4.
MAINTENANCE
The system is designed to operate properly with a significant amount of dust and dirt accumulation on
the optics. However, it is advisable to perform periodic cleaning of the reflector surfaces and optical
windows.
Note
- IT IS RECOMMENDED THAT THE OPTICAL SURFACES BE COVERED DURING ANY
LANE MAINTENANCE THAT GENERATES LARGE AMOUNTS OF DUST AND DIRT OR ALLOWS
CHEMICALS TO SPLASH ABOUT SUCH AS WHEN REFINISHING LANES.
Cleaning recommendations:
1. Use a clean non-abrasive cloth to gently wipe the face of the reflectors on the reflector unit
and the optics window on the EDGE Radaray base cover.
2. If gently wiping does not remove the dirt, as may be the case for oil or cleaner accumulation, a
mild soap (such as dishwashing liquid soap) and water solution may be used. First wash and
then gently wipe dry.
DO NOT USE ABRASIVE CLEANERS OR STRONG
SOLVENTS AS THEY MAY PERMANENTLY DAMAGE
THE SURFACES!
3. The black plastic covers may be cleaned with a protective cleaner such as Armor All
®
, but care
should be taken to protect the optical windows as described above. For this reason, it is
recommended that the user spray the solution onto a non-abrasive rag and then gently wipe
the cover clean.
Armor All
®
is a registered trademark of Armored AutoGroup, Inc.
