EN
.
35
2.
Toggle switch type
INx
•
Switch position -> turn the Qx OFF
o
Dimming time depends on Parameter no. 12 value.
•
Switch position -> turn the Qx
to “MAX dimming value”
o
Dimming time depends on Parameter no. 12 value.
3.
Toggle with memory switch type
This mode is very important when using motion sensors, which are connected to the inputs.
Only positive impulses turn it on and only a negative turn the device off.
Example: If the motion sensor turns on the light and then the user turns it off via the app, when
the negative impulse comes from motion sensor, the light should not turn on again.
INx
•
Position 1 to Position 2 -
> turn the Qx to “MAX dimming value”
o
Dimming time depends on Parameter no. 12 value.
•
Position 2 to Position 1 -> turn the Qx OFF
o
Dimming time depends on Parameter no. 12 value.
Summary of Contents for ZMNHWD2
Page 10: ...EN 10 Remotely dim up to 4 LED bulbs or turn them ON OFF...
Page 16: ...EN 16 4 Package Contents Flush RGBW Dimmer Device Installation Manual...
Page 22: ...EN 22 After Qubino installation...
Page 23: ...EN 23 INSTALLATION EXAMPLE Controlling four halogen or LED lights...
