2
to the cable, from 6 to 9 inches or so from the mic, for securing the cable to the back of the collar or other clothing. Fit
the mic back on to your ears following the same method above. Run the cable and adapter down the back and inside
of your clothes if desired, and attach the tie clip to the back of the collar or other clothing making sure that there’s
enough slack to avoid tugging or pulling of any kind. Turn your head from side to side, and up and down again to
insure there is enough slack in the cable. Adjust the tie clip positioning if any pulling occurs.
You will find your own way that works best for you to fit the mic, depending on your attire and environment. Experiment
with different methods, and you’ll be an expert at applying the mic within a few minutes. A bit of experimentation with
capsule positioning while monitoring the audio can help maximize audio results as well.
Connect the adapter to your transmitter and place the transmitter securely in a place that avoids putting any excessive
stress on the cable, adapter, and transmitter.
We suggest having a spare QA22-CA backup cable available.
When storing the QA22, disconnect the cable. Rotate the ear cushions to the flat position, and insert into the zip
pouch.
