GL100 User manual
4.4.3.
Set the parameters of scheduled fixed timing report
Step_5
Step_3
Step_2
Step_4
Step_1
Step_1:
Select “
Enable This Function
”, after that the parameters of GTTRI can be changed and
the "
Send
" button is enabled.
Step_2:
When “
Enable This Function
” is selected, the command message which shall be sent to
GL100 will be generated based on input and displayed here. Please note this command
message can also be sent to GL100 through SMS or GPRS.
Step_3:
It is recommended to read the parameters from GL100 and edit based on them.
Step_4:
Set the “
Start Time
”, the value range of “HH” is “00”-“23”. The value range of “MM” is
“00”-“59”.
Set the “
End Time
”. The valid format and range are same as “
start time
”.
Set the “
send interval”
. It is the period to report the position information. The value range
is 0-1440 and the unit is minute.
Set the “
fix interval
”. It is the period to get GPS fixing, its value range is 0-86400 and the
unit is second.
Step_5:
Click the “
Send
” button; download the parameters of GTTRI to GL100.
TRACGL100UM002
- 16 -
Queclink
Confidential
