NB-IoT Module Series
BC65-TE-B User Guide
BC65-TE-B_User_Guide 14 / 27
3
Operation Procedures
This chapter mainly illustrates the operation procedures of BC65-TE-B. You can use BC65-TE-B alone to
upgrade firmware and debug BC65-based NB-IoT applications. You can also use it together with an
STM32 Nucleo-64 development board via the Arduino interface to develop STM32-based NB-IoT
applications. This chapter describes the two operation procedures for using BC65-TE-B.
3.1. Operation Procedure with Single Board
This section elaborates the operation procedures of using the BC65-TE-B alone.
3.1.1. Interface Diagram
J301
J304
J303
S101
S102
J302
Figure 4: Interface Diagram of Using BC65-TE-B Alone