LPWA Module Series
BG96 GNSS Application Note
BG96_GNSS_Application_Note 14 / 42
Parameter
2.2.1.4.
AT+QGPSCFG="glonassnmeatype" Configure Output Type of GLONASS NMEA
Sentences
The command configures the output type of GLONASS NMEA sentences.
S_NMEA_type>]
+QGPSCFG: "gpsnmeatype",<GPS_NMEA_type>
OK
If the optional parameter is specified, set the output type of
GPS NMEA sentences:
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Maximum Response Time
300 ms
Characteristics
The command takes effect immediately.
The configuration is saved automatically.
Reference
<GPS_NMEA_type>
Integer type. Output type of GPS NMEA sentences by ORed. Range: 1
–31.
0
Disable
1
GGA
2
RMC
4
GSV
8
GSA
16 VTG
31 All above sentences will be outputted
<errcode>
Integer type. Error code of operation. See
Chapter 4
for details.
AT+QGPSCFG="glonassnmeatype" Configure Output Type of GLONASS NMEA
Sentences
Write Command
AT+QGPSCFG="glonassnmeatype"[,
<GLONASS_NMEA_type>]
Response
If the optional parameter is omitted, query the current setting:
+QGPSCFG: "glonassnmeatype",<GLONASS_NMEA_ty
pe>
OK
