LTE Standard Module Series
EC21 Mini PCIe Hardware Design
EC21_Mini_PCIe_Hardware_Design 40 / 67
Input impedance
: 50Ω
Cable insertion loss: < 1dB
(GSM850, EGSM900, WCDMA B5/B8,
LTE-FDD B5/B8/B12/B13/B18/B19/B20/B26/B28)
Cable insertion loss: < 1.5dB
(DCS1800, PCS1900, WCDMA B1/B2/B4, LTE-FDD B1/B2/B3/B4)
Cable insertion loss < 2dB
(LTE-FDD B7, LTE-TDD B40)
1. It is recommended to use a passive GNSS antenna when LTE B13 or B14 is supported, as the use of
active antenna may generate harmonics which will affect the GNSS performance.
2. Since the GNSS port has a 2.85V voltage output, a passive antenna that causes shorting to GND,
such as PIFA antenna is not recommended.
5.3. Recommended Mating Plugs for Antenna Connection
EC21 Mini PCIe is mounted with RF connectors (receptacles) for convenient antenna connection. The
dimensions of the antenna connectors are shown as below.
Figure 15: Dimensions of the Receptacle RF Connectors (Unit: mm)
NOTES