EVB User Guide
6.
Starting MiniGPS
The MiniGPS tool can help user to view the status of GPS receiver conveniently. The operation
window is shown below:
Sky View
GPS
Information
Signal Level
Start
Command
COM Port
Setting
Message
Bar
When USB to RS232 cable is used, power must be supplied through DC adapter, and the default
baud rate is 9600bps. When USB cable is used, external DC adapter is unnecessary. In this case,
power can be supplied through USB port from PC. The baud rate of the USB port is auto-adaptive.
After assembling EVB accessories, start up the MiniGPS. Select a correct COM port and baud rate,
click the button “Open”.
When PC gets any message from the COM port, a yellow dot will be flashing at the upper right
corner of the Sky Chart.
From the MiniGPS window, user can view CNR message, time, position, speed, precision and so
on. Explanations are listed in Table 8.
L10_EVB_UGD_V1.00
- 24 -
Quectel
