GNSS Module Series
LC29D_EVB(0)_User_Guide 22 / 42
Step 3:
Select the number of tests from 1, 10, 20, 100, 1000, and User Defined. Click the “
Run
” button
to start the test. Click the “
Stop
” button to stop the test. Click the “
Clear + Stop
” button to clear
the data and stop the test.
Figure 11: The Number of Testing
Step 4:
If you select hot start, it is recommended to set the “
TTFF Timeout (seconds)
” to 10 s. If you
select warm start, you can set the “
TTFF Timeout (seconds)
” to 50 s. Or, if you select cold start,
you can set the “
TTFF Timeout (seconds)
” to 100 s. “
TTFF Timeout (seconds)
” can help you
to assess TTFF and save time.
Figure 12: Set TTFF Timeout (Seconds)
