Smart LTE Module Series
SC66 Hardware Design
SC66_Hardware_Design 144 / 139
IC & FCC Requirement
FCC Certification Requirements.
According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a
mobile device. And the following conditions must be met:
1. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The antenna
installation and operating configurations of this transmitter, including any applicable source-based
timeaveraging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion
Requirements of 2.1091.
2. The EUT is a mobile device; maintain at least a 20 cm separation between the EUT and the user’s
body and must not transmit simultaneously with any other antenna or transmitter.
3.A label with the following statements must be attached to the host end product: This device contains
FCC ID: XMR2019SC66A
4.To comply with FCC regulations limiting both maximum RF output power and human exposure to RF
radiation, maximum antenna gain (including cable loss) must not exceed:
Operating Band
FCC Max Antenna Gain
（
dBi
）
IC Max Antenna Gain
（
dBi
）
WCDMA BAND II
WCDMA BAND IV
WCDMA BAND V
Formatted:
Heading 1
Formatted:
Justified, No widow/orphan control
Formatted:
Normal
