Smart LTE Module Series
SC66 Hardware Design
SC66_Hardware_Design 145 / 139
LTE BAND 2
LTE BAND 4
LTE BAND 5
LTE BAND 7
LTE BAND 12
LTE BAND 13
LTE BAND 14
LTE BAND 17
LTE BAND 25
LTE BAND 26(814-824)
LTE BAND 26(824-849)
LTE BAND 41
LTE BAND 66
LTE BAND 71
Bluetooth/ Bluetooth BLE
WIFI 2.4G/5G
5. This module must not transmit simultaneously with any other antenna or transmitter
6. The host end product must include a user manual that clearly defines operating requirements and
conditions that must be observed to ensure compliance with current FCC RF exposure guidelines.
For portable devices, in addition to the conditions 3 through 6 described above, a separate approval is
required to satisfy the SAR requirements of FCC Part 2.1093
If the device is used for other equipment that separate approval is required for all other operating
configurations, including portable configurations with respect to 2.1093 and different antenna
configurations.
For this device, OEM integrators must be provided with labeling instructions of finished products.
Please refer to KDB784748 D01 v07, section 8. Page 6/7 last two paragraphs:
A certified modular has the option to use a permanently affixed label, or an electronic label. For a
permanently affixed label, the module must be labeled with an FCC ID - Section 2.926 (see 2.2
Certification (labeling requirements) above). The OEM manual must provide clear instructions
explaining to the OEM the labeling requirements, options and OEM user manual instructions that are
required (see next paragraph).
For a host using a certified modular with a standard fixed label, if (1) the module’s FCC ID is not visible
