UMTS/HSPA Module Series
UC20 Hardware Design
UC20_Hardware_Design Confidential / Released 42 / 84
3.11. USIM Card Interface
3.11.1. USIM Card Application
The USIM card interface circuitry meets ETSI and IMT-2000 SIM interface requirements. Both 1.8V and
3.0V USIM cards are supported.
Table 12: Pin Definition of the USIM Interface
Pin Name
Pin No.
I/O Description
Comment
USIM_VDD
14
PO Power supply for USIM card.
Either 1.8V or 3.0V is supported by
the module automatically.
USIM_DATA
15
IO
Data signal of USIM card.
Pull-up to USIM_VDD with 15k
resistor internally.
USIM_CLK
16
DO Clock signal of USIM card.
USIM_RST
17
DO Reset signal of USIM card.
USIM_PRES
ENCE
13
DI
USIM card insertion detection.
1.8V power domain.
USIM_GND
10
Specified ground for USIM card.
The following figure shows the reference design of the 8-pin USIM card.
Module
USIM_VDD
USIM_GND
USIM_RST
USIM_CLK
USIM_DATA
USIM_PRESENCE
22R
22R
22R
VDD_EXT
51K
100nF
USIM Connector
GND
GND
ESDA6V8AV6
33pF 33pF 33pF
VCC
RST
CLK
IO
VPP
GND
GND
USIM_VDD
15K
Figure 22: Reference Circuit of the 8 Pin USIM Card