background image

                                                                                                                                             

WCDMA Module 

                                                                                                            UC20  GNSS  AT  Commands  Manual 

 

  UC20_GNSS_AT_Commands_Manual                    Confidential / Released                                    1 / 25 
 
 
 

 

Our  aim  is  to  provide  customers  with  timely  and  comprehensive  service.  For  any 
assistance, please contact our company headquarters: 
 
Quectel Wireless Solutions Co., Ltd.   

Room 501, Building 13, No.99, Tianzhou Road, Shanghai, China, 200233 
Tel: +86 21 5108 6236 
Mail: info@quectel.com

 

 

Or our local office, for more information, please visit:   

http://www.quectel.com/support/salesupport.aspx 

 

 

For technical support, to report documentation errors, please visit:   

http://www.quectel.com/support/techsupport.aspx 

 

 

GENERAL NOTES 

QUECTEL OFFERS THIS INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION 
PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT 
TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT 
MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT 
ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR 
RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN ARE SUBJECT TO 
CHANGE WITHOUT PRIOR NOTICE.   

 
 
COPYRIGHT 

THIS  INFORMATION  CONTAINED  HERE  IS  PROPRIETARY  TECHNICAL  INFORMATION  OF 
QUECTEL CO., LTD. TRANSMITTABLE, REPRODUCTION, DISSEMINATION AND EDITING OF THIS 
DOCUMENT  AS  WELL  AS  UTILIZATION  OF  THIS  CONTENTS  ARE  FORBIDDEN  WITHOUT 
PERMISSION.  OFFENDERS  WILL  BE  HELD  LIABLE  FOR  PAYMENT  OF  DAMAGES.  ALL  RIGHTS 
ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL 
OR DESIGN.   

 

Copyright © Quectel Wireless Solutions Co., Ltd. 2013. All rights reserved.

 

 

Quectel

Confidential

Summary of Contents for UC20



























Reviews: