20
– 02|2016 – Subject to change.
Sportrex2 – Q6000A
Utilisation
Below you will find all the information for adapting the
Sportrex2
to the required modes and
to allow you to use all the convenience functions.
Applying the parking brake
Danger!
When it is stationary, always apply the parking brake to secure the
Sportrex2
in order
to prevent it from rolling away. Also remember to release it before you set off.
f
Stand behind the cabin and hold it securely by the
push handle.
f
Firmly push the parking brake forward with your foot
in order to block the wheels.
f
To release the brake, grip under the parking brake with
your toes and pull it back.
Adjusting the push handle
Use the two light grey pushbuttons to alter the height of the push handle. These are identified
by the word “PUSH”. You can set and engage the push handle at several levels in the 74 – 107 cm
range.
f
Hold the push handle with both hands so that your
thumbs rest on the light grey pushbuttons.
f
Press both pushbuttons and keep them pressed in
order to release the height adjustment.
f
Swing the push handle to the desired height.
f
Release the two pushbuttons in order to activate the
engagement function.
f
Move the push handle slightly up or down until the
height adjustment engages audibly.
