Sportrex2 – Q6000A
Subject to change. – 02|2016 –
27
Utilisation
The outer skin of the 2-in-1 canopy is comprised of a durable transparent sheet. It provides
protection against rain and strong winds, and dissipates exhaust gases out of the cabin.
Opening the weather canopy:
f
Roll up the rain window and secure the roll at the top
with the two toggle fasteners.
Closing the weather canopy:
f
Open the top toggle fasteners and unroll the rain
window over the insect net.
f
Close all the surrounding toggle and Velcro fasteners.
Danger!
Never ride with the cover open. As a minimum, the insect net must be closed in order
to provide protection against stones. In bad weather or heavy traffic, also close the
weather canopy.
Using the ventilation windows
The purpose of the ventilation windows of the
Sportrex2
is to improve air circulation in the cabin.
Right ventilation window:
f
To open, release the Velcro fastener of the window
film in the cabin and fold it down.
f
To close, secure the window film with the Velcro
fastener again.
Rear ventilation window:
f
To open, roll up the cover and lock it with the top
Velcro fastener.
f
To close, secure the cover again with the side Velcro
fasteners.
Danger!
Open
the ventilation window
on hot days or in heavy traffic in order to dissipate warm
air and exhaust fumes out of the cabin more quickly.
Using the sun visor
The sun visor is housed in the canopy between the insect
net and the rain window. The length can be adjusted with
Velcro fasteners.
f
Roll up the rain window.
f
Fold the sun visor to the desired length and lock it
with the side Velcro fasteners.
f
If necessary you can also roll up the sun visor
completely and close the rain window again.
